TECHone Mini Apollo-F3P/3D Aerobat (700mm)

This TECHone Mini Apollo is a very capable slow flier, great for high-alpha 3D and F3P schedules. It is constructed from lightweight EPS (Depron) foam and screen printed with a vibrant unique design. This particular 'new generation' model features milled fuselage, wing, stabiliser and fin parts to reduce the overall weight while retaining strength.

Features:
* Laser cut 3mm genuine Depron parts for optimum strength and minimum weight
* Lightweight carbon fibre truss system virtually eliminates flex
* Ideal for indoor flight and capable of outdoor flight in very calm conditions
* Minimum assembly required can be flight ready in as little as 3 hours
* Vibrant screen printed trim scheme

Specification:
* Wingspan: 700mm / 27.5in 
* Length: 750mm / 29.5in  
* Weight: 105-125g / 3.7-4.4oz with battery
* RC functions: ailerons, elevator, throttle, rudder

What's in the box:
* Screen printed 'milled' Depron airframe parts
* Hardware accessory pack
* Carbon fibre rod and strip
* light weight wheels
* Hook and Loop tape
* Comprehensive Instruction manual

Required:
* Motor: 2203 brushless outrunner
* ESC: 8A (dependent on motor/prop/battery combination)
* Prop: 7 x 3 slow fly
* Servos: 3 x 3.6g
* Battery: 240~300mAh 2S (7.4V) LiPo
* Radio System: TX/RX min 4-channel
* Foam-friendly CA glue or UHU por or epoxy (but keep it light!)

Recommended 2S power systems:

* Motor: 15.6g 1560KV (50W) EMax GT2203 brushless outrunner 
* ESC: Pro 10A ESC 
* Prop: GWS 8 x 4.3SF 
* Servos: 3 x 3.7g Gening AS531 
* Recommended battery: 240~300mAh 2S (7.4V) LiPo

or

* Motor: 13g 1600KV (38W) Pichler Schnurzz brushless outrunner 
* ESC: Pro 6A ESC 
* Prop: GWS 8 x 4.3SF 
* Servos: 3 x 3.7g Gening AS531 
* Recommended battery: 240~300mAh 2S (7.4V) LiPo

or

* Motor: 18g 1500KV (38W) EPower 2203/1500 brushless outrunner 
* ESC: Pro 10A ESC * Prop: GWS 8 x 4.3SF 
* Servos: 3 x 3.7g Gening AS531 
* Recommended battery: 240~300mAh 2S (7.4V) LiPo