Donuts Models Micro Aito Aerobatic Indoor Plane (500mm)

Technical Specs
-Wingspan: 500mm
-AUW: 55-90g Depending on type of setup

This model can be completed in a variaty of setups. You can choose the lightest and aim for 55-70gms which will be a mild aerobatic setup or a 85-90gm that will be a bit wild but a sacrifice in wing loading.

The light setup is as follows.

5gm motor -  409407 use a 6x3-6x5 prop

6amp controller -  400210

2.5gr servos (elevator and rudder) - 406102

3.8gr servo (aileron) - 406340, 406341 or 406104 (please be careful with the type of connectors. make sure you get the polarity correct and plug type correct for your choice of receiver)

120mah 2 cell lipo - 405601

The following setup is better for prop hanging and is more capable of 3d.

9gm motor -  409414 use a 7x3-7x6 prop

6amp controller -  400210

3.8gr servos - 406340, 406341 or 406104 (please be careful with the type of connectors. make sure you get the polarity correct and plug type correct for your choice of receiver)

240mah 2 cell lipo - 405604

{Indoor-model-selection}