Emax Nighthawk 280 Pro FPV Racing Drone (ARF)

On request
Special Price £119.00 Regular Price £169.94
Stock: Out of Stock
Quick Overview

This model is offered at a bargain price and it's in our breaking for spares series.
We have found that some of the models we stock are worth more in spare parts, then our final selling price.

Below is a list of Components that are included with this particular model, alongside the value of each individual part, so you can see the amount you are saving!

4 x Motor: MT2204 (Customization Version) - £12 each
ESC: BLheli 12A plus Flight controller 4in1(Integrate on board) - £60
Propeller: 6045 - £5
FPV transmitter: 20MW/200MW - £22
Antenna: 5.8G Clover 3 Blade Antenna Straight Connector - £5
FPV Camera: 1/3-inch CMOS - £18

The models featured in this group are perfect for scratch builders and experimenters.

However, you can always just fly the model as it is supplied.

{d4} {Quad-Deals}

Secured and trusted checkout with

We are please to introduce a built-up version of the popular Emax Nighthawk FPV racing quad . Now you can have a reasonably priced FPV quad without the hassle of building one.


***** DETAILS ******

 ***Please note the nature of the products requires constant updates and the specs may get updated or altered. Also note this product requires considerable skill in setup and flying****

The Nighthawk Pro 280 was designed from the ground up to meet the exacting specifications of the Drone Racer. It comes fully tuned with the new Skylight 32 integrated flight control board with four 12Amp BLHeli One shot speed controllers. The power system consists of EMAX 2204 2300 kV motors and 6045 propellers mounted on a 10 degree tilt allowing greater forward speeds without sacrificing elevation. For the FPV racer, the Nighthawk Pro 280 includes a 700TVL camera with optional tilt mounts that allow you a perfect horizontal view in flight, and a 20W-200W video transmitter with a selectable switch, allowing you the option to choose the power output of your transmitter. It is without a doubt an exciting new quadcopter that captures the joy of quadcopter racing!



  • Independent designed solid, durable and stable frame, centroid and center of gravity are same even battery installed 
  • Prebuilt frame and extra accessories, Built with powerful EMAX power system and open source flight controller to ensure power and customizable (RTF model can fly after battery and propellers installed) 
  • The sturdy copter frame has extensive flight test and endurance test. 
  • Bright COB rear LED, different LED color can use distinguish copters when group flying (LED power consumption is 4W, which might decrease flying times.) 
  • All in one design to combine ESC, BEC, and flight controller for easy installation and easy replacement. Plug and play motor, easy for swapping motor and no soldering needed.
  • Independent. Independent ESC and flight controller and power supply. ESC switch to perform single ESC calibration and boot pad to perform software and firmware upgrade.
  • Flight controller use 32bit ARM micro processor, fast process speed to ensure fast respond
  • Gyroscope, magnetometer, and accelerometer and barometer expansion port. With CPPM receiver GPS feature can be enable. (GPS module sold separately) 
  • Support ANGLE, HORIZON, HEADFREE, MAG, HEADADJ ...etc modes.
  • Support RC Input: standard signal, CPPM (PPM SUM) signal, PWM singal.
  • Low voltage monitoring and low voltage warning. (Buzzer sold separately)
  • Use EMAX 12A ESC, support open source BLHeli and ONESHOT feature; flight controller is based on NAZE32 Skyline32, support open source configurator Baseflight and Cleanflight
  • Extra power output and power output switch for LED expansion.



  • Wheelbase: 280mm
  • Flight Weight: 440g(No Battery Included )
  • Frame Size: 252mm*260mm*75mm
  • Package Size: 315*295*100(mm)
  • Motor: MT2204(Customization Version)
  • ESC: BLheli 12A 4in1(Integrate on board)
  • Propeller: 6045
  • Flight controller: Skyline32(Integrate on board)
  • FPV transmitter: 20MW/200MW
  • Antenna: 5.8G Clover 3 Blade Antenna Straight Connector
  • FPV Camera: 1/3-inch CMOS

Required to complete:

  • Battery: 3S,1500-2200mAH 30C
  • Transmitter and Receiver
  • Charger


More Information
0% of 100
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account