This LED test module allows you to to carry out tests of all kinds of light emitting diodes in order to check function, brightness, colour and polarity. The LED's can be tested optionally with following currents: ca. 1 mA, 2,5 mA, 5 mA, 10 mA, 20 mA and 50 mA. It is possible to test new as well as used LED's as long as enough solder has been removed from the pins to allow access to the test sockets. In order to enable selection of LED's of equal brightness, there are two test sockets with the same currents (10mA) side by side.
* Operating voltage 9volts DC battery
* LED-connection contact eyes
* LED-testing currents optional 1, 2,5, 5, 10, 20, 50 mA
* Dimensions: 58 x 44 x 25 mm
* 9volt Battery