- For a list of links to all Hyperion software & associated drivers click here
*** New USB version ***
The serial connector version is no longer supplied.
Plug your Emeter in to you PC to get real time datalogging of your tests! Connection to your PC is via a USB connector. Now you can also use this same cable to plug your Hyperion Titan ESC into your PC to program it with ease. To find out more on the two pieces of software & to download them, see the link below.
USING the TI-PRGUSB ADAPTER with TITAN ESC and EMETER
* Whenever connecting the PRGUSB Adapter, be sure that GRD/V+/Tx/Rx orientation is correct.
* For TITAN ESC, note that the "blanked" pin on the adapter connector is always next to GRD
*The Adapter supplies power to the TITAN ESC, so a battery pack must NOT be connected to the TITAN ESC during programming.
*HP-TI-PRGUSB cannot be connected directly to EMETER. You must first insert the adapter for Emeter, which is included with every USB TI-PRGUSB.
*For EMETER v1, note that you MUST turn Emeter ON first, then connect TI-PRGUSB to Emeter, when using Emeter PC Data Software. (otherwise, you will see a "low battery" warning from Emeter...)
Applications: 1) All TITAN MOTOR CONTROLLERS (ESC)
2) Emeter v1 and Emeter v2