This DSMX compatible satellite receiver will extend your range and increase your radio link robustness. Hyperion DSMX compatible satellites offer the latest generation with its Spread-Spectrum DSMX-style compatibility. Hyperion receivers only use high-quality original components, and with state of the art automation. Every HP-DSMXSATD is manufactured using impedance matched PCBs to provide stability and signal strength that exceeds any of the previous generation compatible receivers.
This Satellite receiver works perfectly with most flight controllers that offer a SAT port, so that it can take place of the traditional type of receivers, giving you more space on your multirotor board. Please see manual on how to configure.
Compatible Transmitters: - Spektrum-style DSMX-type Transmitters
Compatible Receivers: - Hyperion DSMX Compatible only receivers: HP-DSMX6RX, HP-DSMX6RXD, HP-DSMX7RXSTAB, HP-DSMX7RXDPPM
Compatible Flight Controllers: - Naze32, CC3D, KK2, MultiWii, APM(2.0 and up)
* Input voltage: 3.3v (via the Satellite Port)
* Compact design
* Frequency: 2.4Ghz DSMX (compatible)
* Compatible with DSMX™ Aircraft radio and module systems.
IMPORTANT: This is not a Spektrum receiver or design copy and is not supported by Spektrum or Horizon Hobby.
These receivers are not supported due to the software not being from the original DSM manufacturer. By using these receivers, although it is unlikely, you acknowledge that you may experience incompatibility issues with your particular radio system. You should be aware of, and accept this limitation, before you buy, essentially because you must accept full responsibility for the technical performance of your equipment. You should have the ablity and knowledge to test your installation to determine whether problems exist before using the receiver.