This is an APC-E prop designed specially for Multirotors, it is a NORMAL rotation prop - spinning counter-clockwise when viewed from the front. Note: adaptor rings are not supplied.
It is one of a new range of APC propellers specifically designed and optimised for Multi-Rotor applications. These propellers bridge the gap between the Thin Electric range and the Slow Flyer range. MR props are lighter than APC-E (thin electric) props and have a higher rpm capability than APC-SF (slow flyer) props.
They are available in two versions:
* Normal rotation (counter-clockwise/CCW when viewed from the front)
* Reverse rotation - also known as 'pusher' (clockwise/CW when viewed from the front)
| Size | Hub Dia. | Hub Thickness | Shaft Dia | Weight |
| 8 x 4.5 | 16.51mm / 0.65in | 8.38mm / 0.33in | 6.35mm / 0.25in | 9.1g / 0.32oz |
| 9 x 4.5 | 16.51mm / 0.65in |
8.64mm / 0.34in
|
6.35mm / 0.25in | 11.1g / 0.39oz |
| 10 x 4.5 | 16.51mm / 0.65in |
8.89mm / 0.35in
|
6.35mm / 0.25in | 15g / 0.53oz |
| 10 x 5.5 | 16.51mm / 0.65in |
8.89mm / 0.35in
|
6.35mm / 0.25in | 15g / 0.53oz |
| 11 x 4.5 | 16.51mm / 0.65in |
8.89mm / 0.35in
|
6.35mm / 0.25in | 17g / 0.60oz |
| 12 x 4.5 | 16.51mm / 0.65in |
9.14mm / 0.36in
|
6.35mm / 0.25in | 22.1g / 0.78oz |
| 12 x 5.5 | 16.51mm / 0.65in | 9.14mm / 0.36in | 6.35mm / 0.25in | 22.1g / 0.78oz |
| 13 x 5.5 | 16.51mm / 0.65in | 9.14mm / 0.36in | 6.35mm / 0.25in | 24.1g / 0.85oz |
| 14 x 5.5 | 16.51mm / 0.65in | 9.65mm / 0.38in | 6.35mm / 0.25in | 30g / 1.06oz |
| 16 x 5.5 | 20.32mm / 0.80in | 9.4mm / 0.37in | 6.35mm / 0.25in | 43.9g / 1.55oz |
| SKU | APCLP14055MR |
|---|---|
| Manufacturer | APC |
| Weight | 0.0500 |
| Barcode | 9900000861278 |
Write Your Own Review