Skip to the beginning of the images gallery

YGE Esc are one of the best available . We now stock the smaller ones for models under 300gms.

4-AMP for 1-2 cell is supplied as a board only at a weight under 1gm . As there are so any varied applications and connections we supply as a board only . This also allows you to use minimum cabling to save weight. In use in single cell applications this esc can give considerable increase in performance. The 4amp is the perfect choice for brush less conversions of Eflite/Parkzone models. Please note as with all micro equipment in this weight range a considerable skill is required to solder and hence not recommended for beginners.

Max 4A continuous current, in with good cooling airflow.
1 to 2s LiPo with automatic detection of cell count reduction at low voltage.
Undervoltage detection disabled.
Speed control (Governor Mode)
Soft start adjustable individually.
EMF brake in 3 steps.
Clock frequency 8 to 16 kHz
Speed limit: 240,000 rpm (2-poler)
Dimensions: 11.5 x 17 x 3.5 mm
Weight 0.6 g without cable
Programming with the Card II
Weight .6g

8-AMP for 2-3 cells the perfect choice for models of 35-140gms this esc would give the high efficiency needed for F3p competition work.

8A continuous current with good cooling, 10A, 15 sec
2 to 3s LiPo with automatic recognition of number of cells, with under-voltage.
4 to 10 cells NiMh, with under-voltage.
Undervoltage detection disabled.
BEC 5V, 2A
Speed control (governor mode).
Soft start
Automatic timing or adjustable in 6 steps.
EMF brake in 3 steps.
Clock frequency 8-16 kHz
Speed limit: 240,000 rpm (2-pole)
Temperature warning
Dimensions: 25 x 17 x 4 mm
Weight 2.2 g without cable, 4.9 g with cable
Programming with the ProgCard II

12-AMP for 2-3 cells the best choice for high performance micro models e.g <150gm EDFs, small fast models.

12 Amp

12A continuous current with good cooling, 14A, 5 sec
2 to 3s LiPo with automatic recognition of number of cells, with under-voltage.
4 to 10 cells NiMh, with under-voltage.
Undervoltage detection disabled.
BEC 5V, 2A
Speed control (governor mode).
Soft start
Automatic timing or adjustable in 6 steps.
EMF brake in 3 steps.
Clock frequency 8-16 kHz
Speed limit: 240,000 rpm (2-pole)
Temperature warning
Dimensions: 25 x 17 x 5 mm
Weight 2.9 g without cable, with cable 6g
Programming with the ProgCard II

The YGE esc are also known to have a good governor mode