The 'M' version of the P-1913 motors have 4 magnets instead of 8 - this means that they are capable of revving much at much higher speeds. This makes them more suitable for EDF & Geared use.
The P-1913 motors from Hyperion are designed to fit straight into models that use a speed 400. The P-1913 can diameter is smaller than most other outrunners (& speed 400's) on the market - this means that if you can fit a traditional speed 400 can motor into your model, then one of these will fit easily in it's place.
These motors may seem small, but they pack an incredible punch for their size! If you rotate the motor by hand they have a very pronounced cogging effect - this gives you an idea of the power to come.
Suggested Prop & Cell combinations:
* 3 cell Lipo:
* GWS EDF55, 11A
* GWS EDF64, 11.6A
* KV: 2580rpm/V
* Weight: 44.5g
* Outside Diameter: 23.65mm
* Length: 26.8mm
NOTE: As with all brushless motor setups we recommend that you use this data as a starting point only & that you measure the current being drawn yourself. These prop selections should be used as a guide only - other props can also be used.