G.T. Power 100A Multifunction Watt Meter, LiPo Capacity and Cell Checker

The GT POWER multifunction meter is a very sophisticated electronic device It is a Watt-meter, battery checker and has many more features essential for electric fliers to ensure safe battery condition and to provide performance data for the power system. Also, the built-in self-balancer can equalize the individual cell voltages of LiPo packs.

The GT Power meter can handle all types of Lithium batteries (Lipo, Lilo, LiFe)
The Watt Meter function will enable you to measure and monitor the performance of your motor/ESC/battery and the electrical throughput/consumption of your power train. With the information provided you will be able to select the most appropriate and efficient propellor/motor/ESC combination for your application. And perhaps avoid blowing up a few motors along the way due to overloading the motor with too big a prop!

The Battery Checker function will provide you with the voltage and residual capacity of your Lithium pack and also the individual voltage of each cell. Note: This unit has a minimum operating voltage of 6.6V. When checking 2S battery packs you will need to provide a separate power source in excess of 6.6V to gain readings for batteries with a lower voltage than 6.6V i.e. discharged 2S LiFe and 2S LiPo packs.

This unit has bare ended input and output leads allowing you to fit your own connectors.

Specifications
* Operates from 6.6V to 60V (on battery checker, balancer and watt meter functions)
* 0 to 100A
* 2 Line LCD display
* Dimension: 105 x 57 x 20 mm
* Weight: 80g

Features
* Helps to prevent peak currents damaging battery, Electronic Speed Controllers, motors, wiring and connectors.
* Verify sufficient operating voltage under load.
* Confirm proper battery charger operation.
* Balance LoPo/LiIo/LiFe batteries
* Check individual cell voltages for LoPo/LiIo/LiFe batteries
* Check remaing capacity in LoPo/LiIo/LiFe batteries
* JST-XH 6 cell balance connector
* Volts - Real time
* Volts - Minimum
* Amps - Real time
* Amps - Peak
* Watts - Real time
* Watts - Peak
* Watts/Hour

Specifications
* Operates from 6.6V to 60V (on battery checker, balancer and watt meter functions)
* 0 to 100A
* 2 Line LCD display
* Dimension: 105 x 57 x 20 mm
* Weight: 80g

Features
* Helps to prevent peak currents damaging battery, Electronic Speed Controllers, motors, wiring and connectors.
* Verify sufficient operating voltage under load.
* Confirm proper battery charger operation.
* Balance LoPo/LiIo/LiFe batteries
* Check individual cell voltages for LoPo/LiIo/LiFe batteries
* Check remaing capacity in LoPo/LiIo/LiFe batteries
* JST-XH 6 cell balance connector
* Volts - Real time
* Volts - Minimum
* Amps - Real time
* Amps - Peak
* Watts - Real time
* Watts - Peak
* Watts/Hour

Specifications

-Operates from 6.6V to 60V (on battery checker, balancer and watt meter functions)
-0 to 100A
-2 Line LCD display
-Dimension: 105 x 57 x 20 mm

-Weight: 80g