Servo Adaptor Lead - JR/Uni Plug to Molex PicoBlade Socket

On request
Stock: Out of Stock

Secured and trusted checkout with

This conversion lead allows servos or ESCs fitted with a Molex PicoBlade 3-pin, 1.25mm pitch plug to be used with a conventional receiver that has standard JR/Spektrum/Uni pin spacing and negative-positive-signal orientation.

Molex PicoBlade 3-pin plugs with a 1.25mm pitch are used on various Futaba, Walkera and DT Rx34d micro receivers. This connector type is also used on the Blue Arrow 2S 100mAh LiPo and Blue Arrow 5A brushless ESC supplied with the Blue Arrow Cupid 610.

Inventive modellers needing a charge lead for a 2-cell LiPo fitted with a Molex PicoBlade 3-pin plug, should be able to adapt the wiring orientation of the JR/Spektrum/Uni plug to allow charging using a conventional charge lead that would normally be used for receiver packs.

* Lead length: 52mm

More Information
0% of 100
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account