Comes with Variable propeller
Ever wanted to try flat spins at the flick of switch? Ever wanted to try seemingly impossible outrageous manoeuvres and recover in milliseconds? This Hyperion 3D machine has the answer. A unique motor mount is included featuring a vectored thrust system which allows the motor to yaw in either direction using a single servo installation. Not feeling brave? A conventional motor mount is also included.
With the motor in the staight ahead position and reduced rates, this light weight model displays extremely forgiving flight characteristics. Flick the rates up and you're instantly in 3D territory. Switch in the vectored thrust system and you're into 'I simply can't believe it' mode.
The super light double airframe structure is constructed from top quality wood with interlocking laser-cut parts to ensure a strong but very light structure. Coupled with an attractive high-contrast colour scheme, this a very cool model. And with the correct Hyperion motor included in the box - great value too!
The construction and translucent covering make this an ideal model - for (optional) LED strip lights! available in our 'Lighting' section.
* Stronger, lighter and optimised geometry
* Fully 3D capable - and more!
* Extremely light weight precision build
* Instant battery access via canopy pin latch
* Battery tray located to achieve easy CG balance
* Top quality balsa and ply
* High visibility colour scheme using translucent film
* Carbon landing gear with light weight wheels and fibreglass wheel pants
* Designed for 3S (11.1V) LiPo
* Assembly required
* Wingspan: 960mm/37.8in
* Length: 1300mm/51in
* Wing area: 21 dm2
* Flying weight: 560-590g/20-21oz
* RC functions: ailerons, elevator, rudder, throttle
* Airframe: Two-piece built-up wing, fus with motor mounts (2), pre-painted, fibreglass cowl and wheel pants, built-up tail surfaces
* Motor: Hyperion Zs2218-14 960KV
* 'Smoked' canopy
* Carbon undercarriage with light weight wheels and steerable tail wheel
* Quality, full hardware accessory pack
* Decal sheet
* Assembly instructions
* ESC: 30A Pro (stock no. 400214 )
* Battery: 850 ~ 1600mAh 3S (11.1V)
* Recommended prop: APC-E 11 x 3.8 Slow-Fly (stock no. 411407)
* Servos: HP-DS09-SCD x 3 (2 ail, 1 ele) or equivalent 23 x 9 x 22.8mm, 7.5g, 1.6/2.0kg/cm stall torque, plus HP-DS09-SMD x 2 (rud 1 , thrust vectoring 1) or equivalent 23 x 9 x 22.8mm, 8.5g, 1.6/2.0kg/cm stall torque - we recommend EMax ES08MA all round (stock no. 406128)
* Radio system: TX/RX 5-channel