Not compatible with LBA-10 NET
Optional LBA Harness for those who often charge over 3A. For use with a 5 cell pack.
These are the same as the standard LBA Harnesses, but have the outside Red-Black wires removed from the pack-side multi-connector. The loose wires are pre-tinned with solder, so simply solder on the correct connector to mate with your battery pack's main power leads. While it is possible to safely charge via the multi-connector at up to 6A, we feel that the High-Amp wiring arrangement is best practice if you usually Balance charge using the LBA 6 at high rates.