This lovely model from potensky is a welcome addition to our aerobat range of models. It is slightly bigger and heavier than theFlash or Yak from RC-Factory but can be flown on the same powerset if care is taken while building to keep the weight down.
The following setup is ideal for most modellers. The aircraft can be kept to a reasonable weight, and better still, most of the components can be used in our aerobats range.
The following is a guide only, make sure you use a watt meter when setting your model up.
Hyperion zs2213/18 on 3s 1200-2000mah with 10x4.7 / 11x4.7 apc slowfly prop and 25amp controller. Good quality high power metal gear servos are a must with this setup. Hitec hs5055MG or HS5065MG are a good choice or the 10g Hyperion Atlas range.
* Wingspan 1080mm
* length 1000mm
* Weight 660g
|EAN / Barcode||9900000832131|
|Model Type||3D EPP Aerobats 1000mm|
|wing_span||1100mm / 43inch|