The new Rc-Factory yak 55 is almost the same as the older 54 but has larger control surfaces for even more authority and a striking new colour scheme.
Full EPP construction
Builds in 1 to 2 evenings
Composite landing gear
Extra large control surfaces
Incredible control authority
Smooth pattern performance
Ideal 3D trainer
Repairs easily with CA
RECOMMENDED RC SYSTEM
4 servos 9 - 12g
RECOMMENDED POWER SYSTEM
100-200W brushless motor
10 - 20A speed controller
3s lipo pack 650 - 1200 mAh
With this light configuration you need to pay close attention to saving every gram posible. If you are not experienced in building foam type models such as this then please choose the 'Power setup'. If kept light this setup can prove very rewarding.
Hyperion zs2209/24 on 3s 600mah with a 10x4.7 apc slowfly prop and 20amp brushless controller. Good quality 9g-12 servos are reccomended for 3d however if it is going to be a 'docile' setup you can get away with cheap 9g servos.
Ideal for most modellers. Aircraft can still be kept to a reasonable weight and will give you the power to get yourself out of trouble. Good choice if learning to prop hang.
Hyperion zs2213/18 on 3s 1000-1200mah with 10x4.7 / 11x4.7 apc slowfly prop and 25amp controller. Good quality high power metal gear servos are a must with this setup. Hitec hs5055 is a good choice or the 10g Hyperion Atlas range.
|Wingspan||: 1000 mm|
|Length||: 1000 mm|
|Flying Weight||: flight 400 - 460g|
|Controlled Channels||: 4 - 5|
|Suitable Motor||: 150 W outrunner|
|Recommended Power Pack||: 3s lipo 650 - 1200 mAh|
|Recommended Servos||: 4 pcs of good quality 9 - 12g servos|